Camouflaged Hybrid Cancer Cell-Platelet Fusion Membrane Nanovesicles Deliver Therapeutic MicroRNAs to Presensitize Triple-Negative Breast Cancer to Doxorubicin

Camouflaged cell-membrane-based nanoparticles have gained increasing attention owing to their improved biocompatibility and immunomodulatory properties. Using nanoparticles prepared from the membranes of specific cell types or fusions derived from different cells membranes, their functional performance could be improved in several aspects. Here, cell membranes extracted from breast cancer cells and platelets are used to fabricate a hybrid-membrane vesicle (cancer cell-platelet-fusion-membrane vesicle, CPMV) loaded with therapeutic microRNAs (miRNAs) for the treatment of triple-negative breast cancer (TNBC). A clinically scalable microfluidic platform is presented for fusion of cell membranes. The reconstitution process during synthesis allows for efficient loading of miRNAs into CPMVs. Conditions for preparation of miRNA-loaded CPMVs are systematically optimized and their property of homing to source cells is demonstrated using in vitro experiments and therapeutic evaluation in vivo. In vitro, the CPMVs exhibit significant recognition of their source cells and avoided engulfment by macrophages. After systemic delivery in mice, CPMVs show a prolonged circulation time and site-specific accumulation at implanted TNBC-xenografts. The delivered antimiRNAs are sensitized TNBCs to doxorubicin, resulting in an improved therapeutic response and survival rate. This strategy has considerable potential for clinical translation to improve personalized therapy for breast cancer and other malignancies.     

Facies and sedimentary environments of the Abu Qada Formation at Gabal El-Gunna,Southeastern Sinai,Egypt

The biostratigraphy, microfacies association, mineralogical interferences, depositional environments and geochemical properties of the Abu Qada Formation, which exposed at Gabal El-Gunna Southeastern Sinai, Egypt were delineated. It belongs to the planktonic foraminiferal Whiteinella archaeocretacea Zone of the Late Cenomanian-Early Turonian and consists of calcareous shale and limestone. The calcareous shale facies is characterized by chlorite, smectite and illite with high concentration of P₂O₅, Zn, Ni, V, and Cr. The carbonate rocks are characterized by foraminiferal wakestone and bioclastic grainstone. These microfacies associations are characterized by barite with high content of Sr. The facies types with faunal contents, geochemical and mineralogical studies suggest a restricted to shelf lagoon open circulation environment.     

Efficient CO2 Capture by Ultra‐high Microporous Activated Carbon Made from Natural Coal

Efficient CO₂ capture capabilities of activated carbons prepared from natural coal are presented. The preparation method involved simple chemical activation using wet impregnation or dry physical mixing of the raw sample with activating agents like KOH or NaOH. The activated materials were characterized for their structural and textural properties by different analysis techniques. The activated samples exhibited well‐developed porosity, large surface area, and high pore volumes and had other active elements like oxygenated functional groups. These groups modified the surface energy of the resultant samples. The superior performance of the activated carbons was attributed to several factors, including large surface area, presence of narrow micropores, and oxygenated functional groups on the surface.     

Design, modeling and characterization of stable, high Q-factor curved Fabry�CP��rot cavities

In this paper, we introduce a novel design for high performance silicon-based Fabry?CPérot cavities and their corresponding design model. According to the design model, the new design shows higher stability, lower insertion loss and higher quality factor Q. Our methodology was based, on one hand, on taking advantage of light reflection and refraction over curved surfaces with curvatures along 2 orthogonal directions, in order to confine the Gaussian beam inside the cavity, thus reducing loss due to beam divergence. Such design enables approaching new limits, where Q-factor is mainly governed by the mirrors reflectance. On the other hand, the use of Bragg reflectors, obtained by DRIE etching enables reaching reflectances above 99%, thus enabling very high Q-factors.     

Synthesis of phosphorus-containing flame retardants and investigation of their flame retardant behavior in textile applications

Flame retardants are a growing area of research interest. Nonhalogenated, durable, and nonleachable flame retardants are one of the main strategies used in the research of flame retardant polymers. In this regard, the covalent attachment of phosphorus-containing flame retardants onto cotton fabric has been developed. Two types of reactive phosphorus-containing flame retardants (MKT-1 and MKT-2) have been synthesized and used as a surface coating for cotton fabric. MKT-1 possesses anhydride and acid functionalities that can react with the  OH functionalities in cellulose. In addition, MKT-2 has both acid and organosilicon groups that can also react with the hydroxy group present in cellulose. The structures of the reactive flame retardants (MKT-1 and MKT-2) were characterized using ¹³C and ³¹P nuclear magnetic resonance spectroscopy. Thermal properties of the coated and uncoated cotton fabrics were investigated using thermogravimetric analysis. Surface characterization was carried out using scanning electron microscopy and X-ray photoelectron spectroscopy. A standard test method used to evaluate the flammability of blankets (BS 5852) was also applied to characterize the fire retardant properties of the coated and uncoated cotton fabrics studied. Different loadings of MKT-1 and MKT-2 on the fabric (10, 20, and 30% by weight in dimethylformamide solution) were applied in the dip coating process. The cotton fabric coated with 30% MKT-2 does not burn after being subjected to a propane burner for 20 s and also produced the highest char yield (36%) at 500 °C. Inductively coupled plasma–optical emission spectrometry showed that MKT-1 contains 8.23 ± 0.33 P% whereas MKT-2 contains 3.88 ± 0.15 P%. Although MKT-1 possess a higher P content than MKT-2, the additive effect caused by the organosilicon and nitrogen groups present in MK-2 enhance its flame retardant properties. Furthermore, the covalently attached flame retardant materials are durable and do not hydrolyze during washing. The mechanical properties of coated fabrics were characterized by a tensile test and significant change in elongation at break was observed. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47935.     

Distribution of adhesive drops within fibre bundles

The motion of a drop along a fibre is studied to formulate a method by which adhesives could be distributed within fibre bundles. The drops had to be located at the cross-points of fibres to provide strength and flexibility to the mat. Among the various methods of application, described in detail, only the solution method gave satisfactory results. An empirical relationship was derived to estimate the mass of the adhesives retained by the fibres.     

Simultaneous interpenetrating polymer networks based on bromoacrylated castor oil polyurethane

In the first part of this study, simultaneous addition of bromine and acrylate to the double bonds of castor oil was achieved. In the second part of the study, bromoacrylated castor oil (BACO) was reacted with toluenediisocyanate (TDI), to form a prepolyurethane (BACOP). The prepolyurethanes were reacted with styrene (STY), 2‐hydroxyethyl methacrylate (HEMA), methyl methacrylate (MMA), and 3‐(acryloxy)‐2‐hydroxy propyl methacrylate (AHPMA) free radically, using the acrylate functional group to prepare the simultaneous interpenetrating polymer networks (SINs). 2,2′‐Azobis (isobutyronitrile) (AIBN) was used as the initiator and diethylene glycol dimethacrylate (DEGDMA) was used as the crosslinker. BACO and BACOP were characterized by IR, ¹H‐NMR, and ¹³C‐NMR techniques. Synthesized polymers were characterized by their resistance to chemical reagents, thermogravimetric analysis, and dynamic mechanical thermal analyzer (DMTA). All the polymers decomposed with 6–10% weight loss in a temperature range of 25–240°C. MMA‐type SIN showed the highest T_g (126°C), while STY‐type SINs showed the highest storage modulus (8.6 × 10⁹ Pa) at room temperature, with respect to other synthesized SINs. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2947–2955, 2006     

Training size optimization with reduced complexity in cell-free massive MIMO system

Training sequence is used in multiple antenna systems to estimate channel state information and mitigate channel distortion between transmitter and receiver. However, the training sequence or pilot must be limited to a certain size in order to reduce the impact of overhead loss due to limited channel coherence length in mobile users. In this paper, we proposed to use training size optimization in cell-free massive MIMO system. In addition, we proposed and compared the performance of different training size optimization algorithms, namely exhaustive search optimization, bisection optimization and min–max optimization, with each method has different level of calculation complexities. The results showed that in general, all of the 3 training length optimization methods improved the downlink rate compared to the conventional pilot length method. We also showed that the training optimization methods are more effective when the coherence length is small or the number of users is very large. In the case of large number of users or small coherence length, the exhaustive search has the best median downlink rate, followed closely by min–max optimum and finally the bisection method. Even though the exhaustive search optimization has the best downlink rate, we showed that the proposed reduce optimization complexity methods has significantly less calculation complexity. In addition, the median downlink rate performance of min–max optimization method is only slightly less than that of the exhaustive search method for various number of users and coherence length.

     

Assessment of wheelchair skills based on analysis of driving style

In this paper, we propose a learning assessment method based on the analysis of learner’s behavioural style. This method was first applied for wheel-chair driving tasks because it is simple and risk-free, but unusual for users. Seven classic performance indicators based on joystick control were used to characterise the users’ driving style. We assumed that the learning effectiveness of the users can be evaluated by comparing their driving style with the reference ones, which could be extracted from experienced users. The evaluation was carried out for six novice users and eight experienced users. The users were asked to carry out several typical driving tasks for seven trials at first. The fuzzy C-means clustering method was used with the data of the experienced users to obtain the reference driving styles. Next, an evaluation was performed for novice users by comparing their driving styles with the reference ones. The results showed that, for all of the experienced users, their driving styles could be classified into two reference types. In addition, there was no significant difference in their driving styles from one trial to another, even for a user with disabilities, which means that their driving style was stable. On the other hand, novice users had switching behaviours during the learning phase; however, after eight additional trials, each novice user’s driving style converged to one of the two identified reference types, meaning that the novice users could achieve a stable performance after learning, which was also validated by an expert therapist.     

ROMP‐based boron nitride composites

The present work focuses on the investigation of the thermal and dielectric properties of composites obtained by surface‐modified hexagonal boron nitride (hBN) and ring‐opening metathesis polymerization (ROMP) based polymer. A new kind of high performance composites was developed based on using amino silane functionalized hBN (AS‐hBN) and bromine functional group possessing homo and copolymers synthesized via ROMP pathway. Aminosilane capped boron nitride (BN) and bromine bearing polymer backbone enhance the interaction between filler and the polymer chains. The effects of surface‐modified BN (AS‐hBN) and its content on the dielectric properties, and thermal resistance of composites, are systematically investigated and discussed. The resultant composites possess high electrical break over voltages. While all of the ROMP‐based films exhibit low ?′ value in a wide frequency range, in the case of the composite with 20% AS‐hBN and poly(bromooxanorbornene‐co‐cyclooctadiene) (ROMP‐BN‐6) displays very low dielectric constants in around 1.5 up to 1 MHz at 20 °C. This value is significantly lower than that of common polymer dielectrics, which is usually in the range of 3–6. Besides the lowest dielectric constant of ROMP‐BN‐6, it has also the smallest dielectric loss tangent even at high temperatures. Tan δ of ROMP‐BN‐6 is 0.003 and 0.0067 at 10 Hz–1 MHz at 20 °C, respectively. Thermal stability of polymers was also improved by introducing surface‐modified hBN. Polymers bearing 20% AS‐hBN are highly thermally stable up to ～350 °C and gave 25% char yield at 800 °C. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45658.